These are the classic T-style pickup routes. The neck and bridge pickup routes are shown here.

Depth: 0.75″

This is a route for a standard S-style single coil pickup for rear control route bodies. It is intended that the pickup be mounted to the body using a pickup ring (i.e., without a pickguard). The image at right shows two such routes: for the bridge (slanted) and middle pickups. Screw holes for mounting the pickup rings are shown as well.

Depth: 0.75″

This option includes deeper pockets to accommodate the depth of the pickup height adjustment screws.

Depth: main pocket: 0.75″, screw pockets 1.25″

Note that if a humbucker is used in the bridge position of a T-style body, either a humbucker bridge (e.g., Gotoh) or a hardtail bridge is required.

This is the same shape route as the normal humbucker route, above, but does not include the added depth in the screw area. The intention is to mount the pickup by screwing directly into the guitar body.

Depth: 0.75″

Note that if a humbucker is used in the bridge position of a T-style body, either a humbucker bridge (e.g., Gotoh) or a hardtail bridge is required.

Depth: 0.75″

Note that if P90 is used as a bridge pickup of a T-style body, then the bridge must be a hardtail.

These are the classic S-style pickup routes. The neck, middle and bridge pickup routes are shown here.

Depth: 0.75″

This is the standard S-style pickup route for a humbucker pickup in the bridge position with single coil pickups in the middle and neck positions, loaded into a pickguard.

Depth: main pocket: 0.75″, screw pockets 1.25″

This is the S-style pickup route for two humbuckers with a single coil pickup in the middle position, loaded into a pickguard.

Depth: 0.75″ with 1.25″ screw slots

This route allows for any combination of single coil or humbucker pickups in conjunction with a pickguard on the S-style body.

Depth: 0.75″ with 1.25″ screw slots

These are the classic P-style pickup routes.

Depth: 0.75″

These are the classic J-style pickup routes.

Depth: 0.75″