Basic J-Style Bass Guitar Kit

Basic J-Style Bass Guitar Kit

$169.00$199.00

Clear

Description

This is a great quality, easy to build, dual single-coil electric bass kit. These kits go together easily, all the parts work together well, and the instrument can be assembled without a lot of experience with woodworking or instrument building.

If you choose, every hole is drilled for each component, including neck, bridge, pickups, pickguard and strap button mounting holes. If you choose, there will be no soldering required; all electronics connect together with easy to attach connectors. We have done most of the hard work for you! The body is well sanded out of the box, but will need light sanding before finishing; no filling should be required.

The bass kit comes with chrome hardware, bridge, a white pickguard, two single coil pickups, and all necessary screws and hardware. A set of strings and a cable are even included. This is not a kit of questionable quality where the parts simply don’t work together (like many of the other kits that you will find on Ebay, Etsy and Amazon).

Features:

  • Traditional shape and neck profiles
  • Solid alder body
  • Maple neck with rosewood fingerboard
  • Two traditional single coil pickup configuration
  • 3-way switch, dual volume and tone control.
  • (Optional) No drilling required
  • (Optional) No soldering required; simple snap together connectors (optional pickups are not prewired/soldered)

The process of building our kit guitars and basses is straight forward and requires little experience in woodworking or in instrument building. The entire instrument can be assembled with a few simple tools. Setting the instrument up for your playing style is also straightforward. We will guide you though the basic process in our instruction manual. For more complex or particular setup requirements, we suggest that you work with a professional for setup - just as you would with any instrument that you purchase.

Tools needed for assembly:

  • Philips #1 and #2 screwdrivers
  • wire clippers (to trim strings)
  • string radius gauge (we provide one with the kit)

The process of finishing the instrument can be very simple or very complex. See our guitar finishing pages for some pointers. You will need:

  • 200+ grit sandpaper or sanding blocks
  • finish of your choice

Full specification can be found on the following pages:

We offer several options to allow you to tailor your guitar to your guitar building experience and your goals for your instrument, depending on the exact kit model:

  • Pickups: All of our instruments come with good basic pickups. We offer you options to change these pickups for several optional pickup sets. Note that these optional pickups will not come pre-wired/soldered. Soldering of these pickups will be required.
  • Wiring: If you chose the optional snap together wiring, then all of our instruments come pre-wired and pre-soldered, so that you can assemble the instrument without needing to do any soldering. You simply snap a few connectors together to complete the electrical connections before you screw down the pickguard, control panel, and output jack plate. This is detailed on the guitar kit wiring and hole drilling description page. If you would prefer to not have your kit pre-wired and pre-soldered, please let us know.
  • Drilling: If you so choose, then every guitar kit comes with some holes pre-drilled for you. However, we offer you the option to not have some holes drilled at the factory. This is detailed on the guitar kit wiring and hole drilling description page.
Go Top
FREE SHIPPING for a LIMITED TIME on ALL DIY Guitar Kits! Enter Promo Code: "Kits-Ship-FREE" at Checkout.
+